RCA P46738 CRT Television User Manual


 
By setting the alarm, you can
program the TV to turn on and/or off
by itself.
After the ON TIME is set and the
ALARM ON/OFF function is set to
ON, the "IV will automatically turn
on each day at the time you selected
and remain on until the OFF TIME
is reached. If no OFF TIME has
been programmed, the TV will
remain on until you turn it off.
The ALARM ON/OFF function lets
you easily deactivate or reactivate
the alarm without having to reset the
ON TIME and OFF TIME.
When the alarm time is reached, the
set will turn on at whatever volume
you left it when you last turned it
off. So if you want the TV to come
on loudly at the ON TIME, be sure
the TV is playing loudly when you
turn off the TV for the last time.
When the A/ARM ON/OFF function
displays SET CLOCK, you will need
to set the clock time before you will
be able to turn on the alarm function.
Details for setting the clock are
on page 4.
IMPORTANT NOTE: During extended
power failures the alarm function will be
disabled. The alarm ON TIME and OFF
TIME will stay set but the ALARM ON/OFF
function will be set to OFF and will display'
SET CLOCK to inform you that the clock
must be reset to the correct time. Once the
clock has been reset you can reactivate the
ALARM function by changing the A/ARM
function to ON.
Setting the Alarm .
1. Repeatedly press MENU PROG to
select SETUP MENU, and then press
+ or- to display setup functions.
Press MENU*PROG to select SET
ALARM function, and then press + or
- to display the alarm settings.
. When the firstALARM function is
selected, pressing + or- will.switch
the setting between ON and OFF. Set
this function to ON if you want to
activate the alarm. When this
function is set to OFF, the alarm is
deactivated and the "IV will not turn
on or off by itself.
.
Note: If SET CLOCK is displayed next to
ALARM, you will need to set the clock
time before you will be able to turn on the
alarm function. Details for setting the
clock are on page 3.
Press MENU.PROG to select the next
function called ON TIME. If you
want the TV to turn on by itself, enter
the desired time by first pressing - to
select the hour(including AM and
PM) and then pressing + to select the
minutes. If you only want the TV
.
.
to turn off by itself and not turn on,
you can disable the ON TIME by
pressing - until the word
DISABLED appears.
Note: Remember to check the AM/PM
setting. Midnight is 12:00 AM and
noon is 12:00 PM.
Press MENU.PROG to select the
next function called OFF TIME. If
you want the TV to turn off by
itself, enter the desired time by fast
pressing - to select the hour
(including AM and PM) and then
pressing + to select the minutes. If
you only want the TV to turn on by
itself and not turn off, you can
disable the OFF TIME by pressing -
until the word DISABLED appears.
Press MENU.PROG to select the
next function called CHANNEL.
This function lets you program
which channel the "IV will tune
when it turns on at the ON TIME.
Press CHAN up or down to select
the channel, and then press + or - to
enter it into the CHANNEL function.
Note: The TV will change to the
channel that you select. This will help
you to confirm that it is indeed the
channel you want the "IV to turn on to.
21