RCA P46738 CRT Television User Manual


 
Special Recording onto VCR
(This connection only allows you to record on the VCR
whatever is currently being displayed on the TV screen)
This is not a common application for
recording with your VCR, but you may
fred !ituseful in certain situations. This
connection _,ill let you record onto the
VCR whatever is being displayed on the
TV screen such as a TV program. You'll
also be able to record signals from
another VCR (or similar device) that is
connected to the TV's INPUT 1 or 2
jack.,;.
The TV must remain turned on during
recording. If you change charmels on the
"IV, the channel change will be recorded
on the VCR tape unless you pause the
VCR during recording.
Because your TV is cable-compatible, this
application may be used to record cable-TV
pro[,xams from the "IV onto a VCR that is not cable-
compatible.
You may also want to use this connection to dub or edit VCR
tapes with two or three VCRs. By connecting one VCR (or
camcorder) to the INPUT 1 jacks and another VCR (or
cameorder) to the INPUT 2 jacks, you'll be able to selectively
edit and record whatever is playing on the TV screen onto a
third VCR (or camcorder) connected as shown here to the
SELECT OUT jacks.
Back of VCR
Back of "iV
I[ I i "_'-t
L P.kBLE J_ffEN_A
l" . ,! @
AudioNideoCables _ t | (_ I
(Such as RCA #AH069G) _ } __ } _a_°_CT
:,_ ®
To see the signal from a device connected to the INPUT I jacks,
select channel 91. Select channel 92 to see the signal from a
device connected to the INPUT 2 jacks.
Notes: Signals from theS-VIDEO connector do not come thruthe
SELECT OUT jacks. To recordfrom an,S-Video component,
remember to also connect the regular video cable to the VIDEO
INPUT I jack and then tune to channel 91.
You will not be able to record the picture-in-picture inset picture or any
of the menus or status displays.
S-'VI-IS (Super VHS) VCR
(This connection allows you to record
TV programs and play back tapes.)
Incoming
Cable
Audio/Video Cables*
(such as RCA
#AH069G) -
Back of VCR
S-Video Cable (such as RCA #186008)*
Coaxial Antenna Cable*
(such as RCA #AH037)
/
/
/
Shown here is one method of connecting your S-VHS VCR to
your TV. Connect the S-VIDEO OUT connector on the back
of the VCR to the S-VIDEO connector on the back of your TV
using an S-Video cable: Remember to connect the audio
cables from the VCR to the INPUT 1 LEFT and R/MONO
jacks on the back of the "IV. The S-Video cable carries only
video.
Note: Remember to also connect the videocable forpicture-in-
pictureviewing or if you plan to use the SELECT OUTjacks for
)
recording. When recording fromSELECT OUTjacks, runethe "IV to
channel 91 to see thesignal fromthe S-V/IS VCR. Whendisplaying
picture-in-picture,the TV automaticallyminimizesany annoying
differencesin tint between the smalland largepictureby electronically
coupling the S-VIDEO input to the VIDEO I input.
Operation: If the S-VHS VCR is connected as shown above,
tune the TV to channel 90 to view whatever the VCR is playing.
The word S-VIDEO will appear on the TV when you select
Channel 90.
* Optional accessories are availablefrommostRCAdealersand electronicssupply stores.
36