RCA P46738 CRT Television User Manual


 
Follow one of these Steps to connect a cable-TV system to your TV instead of a home antenna.
Since cable-TV systems vary, you may wish to consult your local cable-TV company for additional information.
You can connect the cable-TV system to either ANTA or ANTB as explained on page 25.
Follow this diagram if your cable company does not require a converter/decoder box
A
Incoming
Cable
no scrambled channels):
_BI.E/ANT_NA
AI¢I"A
ltJm" B
BACK
OFTV
B
Follow this diagram if your cable company requires a converter/decoder box that can be controlled by remote control.
Most brands of remote-controllable boxes can be controlled by the remote that came packed with your TV.
D_tails for programming your TV's remote to also control the converter/decoder box are on page 33.
See diagram D if you want to connect a VCR.
Incoming _l_-
Cable
'
Remember to tune your TV to the
output channel of the converter box
(usually 2, 3, or 4) when selecting
channels via the converter box.
¢_AlCrEI_A
_A
COI_/im'I'Lq
BACK
OF TV
C
Follow this diagramif your cable company requires a converter/decoder box that cannot be controlled by remote control.
Scrambled Cable-TV Channels
Some cable-TV decoders require that you manually switch
from regular to scrambled channels on the decoder
whenever you wish to view the premium pay channels.
By connecting the decoder to the ANTA input and
CONVERTER output on the TV as shown here, you can
switch between the scrambled and unscrambled channels
using the remote control.
To change the incoming signal from ANTA to ANT B,
simply press the ANTENNA button on the remote. Each
time you press the ANTENNA button, the channel numbers
will change color on the screen to show which antenna
signal you are watching.
*Optional accessories are available from most RCA dealers and
electronics supply stores.
(Converter/Decoder)
Incoming
Cable
BACK
OFTV
I
\1
Coaxial Antenna Cables*
Nonscrambled cable channels will come thru the ANTB input
whenever the channel numbersare yellow. The scrambled
channel from the decoder box will come thru the ANTA input
whenever the channel numbers are blue. Be sure to leave the
decoder box set to the scrambled channel, and remember to
tune your TV to the output channel of the converter box
(usually 2, 3, or 4).
31