Filter
Top Products
10
setup and connections
C
ONNECTING Y OUR VCR OR LASERDISC PLAYER
Use common RCA cables (not provided) to connect your VCR or laserdisc
player to your Cinema Screen monitor. To connect your VCR or Laserdisc
player:
1. Turn off the power to the monitor and VCR or laser disc player.
2. Connect one end of your RCA cable to the video output connector on
the back of your VCR or laser disc player. Connect the other end to the
video input on the monitor.
3. Use standard RCA cables to connect the audio from your VCR or laser
disc player to AUDIO2 input jacks on the monitor (if your VCR or laser
disc player has this capability). Be careful to keep your right and left
channel connections correct for stereo sound.
4. Turn on the Cinema Screen monitor and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player user’s manual for more
information about your equipment’s video output requirements.
CONNECTING Y OUR DVD PLAYER
To connect your Cinema Screen monitor to a DVD player:
1. Turn off the power to the monitor and DVD player.
2. Use a standard video cables to connect your DVD player to the
CMNT1 input on the monitor, or use the DVD player’s S-Video output.
(Use a standard S-Video cable to connect to the S-Video input on the
Cinema Screen monitor.)
3. Turn on the monitor and the DVD player.
CONNECTING A PERSONAL COMPUTER
If you are connecting a computer to the monitor, you must attach ferrite
cores to both ends of the DVI cable to meet FCC standards (see page 6).
If you have a computer with digital RGB output, connect it to the RGB3
jack on the monitor.
For IBM VGA (or compatible) or Macintosh (or compatible) connect to the
RGB1 jack on the monitor.
RCA cables (audio/video cables) are sold as a bundled set.