Filter
Top Products
36
The Menu System
SETTING A COMPUTER IMAGE TO THE CORRECT RGB
SELECT MODE
The RGB function allows you to select the correct viewing mode for the
type of computer image you are displaying.
The RGB SELECT function has four modes:
RGB – Use this mode for normal computer images.
VIDEO – Use this mode to display video signal that has been converted to
the RGB signal.
WIDE – Use this mode to prevent an image that is inputted from 852 dot X
480 line signal with a vertical frequency of 31.72 KHz from being
compressed horizontally.
DTV – This mode is primarily used to optimize picture quality if you are
using a generic-brand DTV receiver which output signal at 480P
(progressive scan) lines.
To change the RGB SELECT mode:
1. From the main menu, highlight and select the OPTIONS menu. The
OPTIONS menu is displayed.
2. Highlight the RGB MODE option.
3. Use the button to scroll through the mode choices. The settings
switch as follows:
4. When the desired mode is selected, press the button to return the
the OPTIONS menu items. You can continue making adjustments
within the OPTIONS menu, press GO BACK to return to the previous
menu or press CLEAR to exit the menu system.
: RGB1
: VIDEO1
: CMPNT1
: RGB2
: VIDEO
: 1080A
:1
OPTIONS
SEL.
ADJ.
AUDIO INPUT
AUDIO1
AUDIO2
AUDIO3
BNC SELECT
RGB SELECT
HD SELECT
RGB3 ADJUST
RETURN
This is the OPTIONS menu with the RGB
SELECT option highlighted.