Filter
Top Products
15
Setup and connections
INPUT SELECT
POWER STANDBY
VOLUME
Approx.
7m/23 ft.
30°30°
STOP PAUSE
MONITOR
ON OFF
AUX
DVD
SAT CABLE
RECORD
PLAYFORWARDREVERSE
SLEEP
GO BACK
C
H
+
C
H
-
V
O
L
V
O
L
WHOMUTE
INFO
MENU
CLEAR
GUIDE
ANTENNA
1
2
3
4
5
6
7
8
9
0
INPUT
VCR1
VCR2
OK
Z
Z
Z
CINEMA
VGA
VIDEO
Y u v
SOURCE
Installing the batteries
USING Y OUR REMOTE CONTROL
INSERTING BATTERIES
1. Remove the battery compartment cover from the remote control.
2. Insert batteries (included) as shown on the diagram inside the
battery compartment.
3. Replace the battery compartment cover.
Use your remote control from a distance of about 7m/23 feet from the
monitor’s remote control sensor and at a horizontal angle of within
30°. The remote operates on line of sight, so if there is anything
blocking the path between the remote and the remote control sensor
on the front of the monitor, the remote may not work.
• Don’t expose the remote control sensor on the front of the monitor
to direct sunlight or strong artificial light.
• Don’t get the remote control wet.
• Avoid heat and humidity.
• When not using the remote for a long period of time, remove the
batteries.
PROGRAMMING THE REMOTE
The universal remote control that came with your Cinema Screen
monitor is already programmed to operate most RCA, GE, and
PROSCAN VCRs, DVD players, laserdisc players, and satellite
receivers. This remote is also capable of operating many other brands
of remote-controllable electronic components, but you must program
it to do so.
FIND OUT IF Y OU NEED TO PROGRAM THE REMOTE
To determine whether the universal remote needs to be programmed,
turn on one of your components, such as a VCR. Point the remote
control at the component and press the component button (for
example, the VCR button). Now press the ON•OFF button on the
remote. If the component doesn’t turn off, you need to program the
remote control in order for it to operate that component.