Filter
Top Products
12
setup and connections
C
ONNECTING EXTERNAL SPEAKERS* TO THE CINEMA SCREEN MONITOR
The Cinema Screen monitor doesn’t have internal speakers, so in order to get sound you must connect external speakers.
External speakers can reproduce sound from VIDEO or RGB signal sources.
External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stereo system amplifier
to the audio outputs.
CAUTION: Unplug the monitor and all connected components before connecting external speakers. Use only speakers
with 6 to 8-ohm impedance and a power output rating of 7 watts or more.
To connect external speakers directly to the Cinema Screen monitor:
1. Strip the ends of the speaker wires.
2. Press down the tabs below the speaker terminals and insert the speaker wire and release the tab to secure the speaker
wire connection.
[a] Connect the right speaker (located at right side of the monitor when viewed from the front) positive (+) wire to RIGHT +.
[b] Connect the right speaker negative (–) wire to RIGHT -.
[c] Connect the left speaker negative (–) wire to LEFT–.
[d] Connect the left speaker positive wire (+) to LEFT+.
*Not included
RGB 3
DIGITAL RGB
RGB 1
R
G
B
C
R
Y
C
B
P
R
Y
P
B
H-SYNC
V-SYNC
L
(MONO)
R
VIDEO 1
VIDEO 2
VIDEO 3
L
(MONO)
R
Y
C
B
Y
P
B
C
R
P
R
L
(MONO)
R
AUDIO 3 CMPNT 1 AUDIO 2 VIDEO INPUTS AUDIO 1 BNC SELECT:
RGB
2
B/CMPNT
2
HD MONITOR IN
+
-
+
-
LEFT
RIGHT
EXTERNAL
CONTROL
REMOTE
CONTROL
CONTROL
LOCK
ON/ OFF