Filter
Top Products
11
Setting Up the VCR
Cable Box Setup
All channels: enter two numbers for
output channel of your cable box or
press INPUT for Video Input.
Only SOME channels: if you only use
the cable box to tune premium
channels.
Cancel setup: select to cancel.
Video Input Channel
You can select the Video Input
“channel” by hitting the INPUT button
on your remote control. For more
information about this feature, see,
“Finding Your TV’s Video Input
Channel,” in the Reference section of
this manual.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
6 SAT Setup
0 Exit
3. Press 5 to display CABLE BOX SETUP. Then select one of
the three choices.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
channels?
1 ALL channels
2 Only SOME channels
3 Cancel setup
4. If you selected ALL CHANNELS, enter the output
channel of your cable box, usually 03, 04, or video line
input and press MENU.
5. Press MENU and select whether your cable box is
remote controllable.
CABLE BOX SETUP
Can your cable box be
operated with a remote
control?
1 Yes
2 No
6. If your cable box is remote-controllable, turn it on and
tune it to channel 2. Press MENU to continue.
(Continues on Next Page)