Filter
Top Products
54
OTHER FEATURES
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel
INDEX SEARCH
Press REV OR FWD
to begin scanning
OR
enter a specific
index number
_ _
Press SEARCH to exit
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWD
to go to -:--:00
Press SEARCH to exit.
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWD
to go to 0:00:00
Press SEARCH to exit.
Index Search
The VCR has a “VHS Index Search System” that
automatically records an index mark on the tape every
time you start a recording.
During playback you can locate the program you want to
play by the number of index marks or by scanning. The VCR
will search forward or reverse from the location you are on
the tape.
To Search:
1. Press STOP.
2. Press SEARCH on the remote to display the INDEX
SEARCH screen.
3. If you want to search through a certain number of
index marks, press two number buttons to enter the
number of marks you want to search. Press CLEAR on
the remote to correct an entry.
4. Press FORWARD to search forward or REVERSE to search
in reverse. The VCR will locate your index mark and
begin playback. If you did not enter a specific index
number, the VCR will locate the next index mark and
begin playback.
5. Press STOP to end index searching.
Some index marks may be missed by the VCR:
• A mark too close to your location on the tape
• The mark at the beginning of a recorded segment of
five minutes or less
• The first index mark on the tape when you start at the
beginning of the tape
Go-To Search
The Go-To Search feature enables the VCR to quickly locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.
1. Press STOP.
2. Press SEARCH on the remote until the GO-TO SEARCH
screen appears on the screen.
3. Press number buttons to enter the hour and/or minute
of the counter reading you want the VCR to “go to.”
Press CLEAR on the remote to correct an entry.
4. Press FORWARD to search ahead or REVERSE to search
behind.
5. Press STOP to end Go-To searching.
If you insert a pre-recorded tape
with the safety tab removed-- Index
and Go-To searches are not available.