Filter
Top Products
28
LCD Touchscreen Display Time (continued)
4. Press and release the LCD OK key. The Set Time? Screen now
appears in the LCD.
5. Press and release the SETUP key or the LCD UP ARROW key
repeatedly until the Set LCD On Time? Screen is displayed.
Press and release the LCD OK key.
6. The LCD displays the LCD On for 10 Secs Screen (or the
length of time previously programmed). Press and release
the LCD UP or DOWN ARROW keys to select the desired On
Time. You can only change the time in 10-second increments
from 10 to 90 seconds. Press and release the LCD OK key
twice to confirm and save your settings on the Confirm to
Save? Screen.
7. The Set More Options? Screen is displayed. The LCD
Touchscreen Display Time setting is now complete. To exit the
Setup Mode, press and release the LCD EXIT key, followed by
the LCD OK key on the Exit Setup Screen.
Note: The 10-second display time will maximize battery life.
If you have changed the LCD Touchscreen Display Time to
assist in the Setup process, you may want to reset the display
time back to 10 seconds once the Setup process is complete.
Set Day and Time for LCD Display
You can set the day and time the LCD displays. To set the day and time for the LCD display,
follow these steps:
1. Press and hold the SETUP key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and
the touchscreen shows the Code Setup Mode? Screen.
2. Release the SETUP key.
3. Press and release the SETUP key repeatedly until the
Set More Options? Screen appears. Press and release the
LCD OK key.
4. The Set Time? Screen now appears with the current day
(DAY) and time (HH:MM) in the LCD. Press and release
the LCD OK key.
RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 28