Filter
Top Products
30
Master Reset
4. The Set Time? Screen now appears in the LCD. Press and
release the SETUP key or the LCD UP ARROW key
repeatedly until the Set Light On Time? Screen is displayed.
Press and release the LCD OK key.
5. The LCD displays the Light On for 10 Secs Screen (or the
length of time previously programmed). Press and release the
LCD UP or DOWN ARROW keys to select the desired On
Time. You can only change the time in 10-second increments
from 10 to 90 seconds.
Note: The Backlight On Time cannot be set greater than
the LCD display time. Press and release the LCD OK key
twice on the Confirm to Save? Screen to confirm and save
your settings.
6. The Set More Options? Screen is displayed. The Backlight On
Time setting is now complete. To exit the Setup Mode, press
and release the LCD EXIT key, followed by the LCD OK key
on the Exit Setup Screen.
A Master Reset returns all the RCU1010RF defaults back to the original factory settings. The Master
Reset clears all customer-programmed codes, Learned commands and SmartMacros, and resets
all key labels.
To perform a Master Reset, follow these steps:
1. Press and hold the SETUP key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and the
touchscreen shows the Code Setup Mode? Screen.
2. Release the SETUP key.
3. Press and release the SETUP key repeatedly until the Reset
ALL? Screen appears.
4. Press and release the LCD OK key.
5. The LCD displays the Confirm to Reset? Screen. Press and
release the LCD OK key. The Please Wait Screen appears and
the LCD touchscreen turns off.
6. All settings are now reset to the factory default.
Backlighting (continued)
RCU_1010_RF_IB_RevA.qxd 9/24/03 10:31 AM Page 30