Filter
Top Products
Chapter 3: Additional Information
24 Chapter 3
The Remote Control Doesn’t Work
• Something might be between the remote and the remote sensor on the component. Make sure
there is a clear path. (This is only when using the remote to operate other components, such as a TV
or VCR.)
• Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote.
• You might need to drain the remote’s microprocessor: remove batteries and press the number 1
button for at least 60 seconds. Release the 1 button, replace the batteries, and reprogram, if
necessary.
Care and Cleaning
CAUTION: Turn OFF your unit before cleaning.
You can clean the unit as required, using a soft lint-free cloth. Be sure to occasionally dust the
ventilation slots in the cabinet to help assure adequate ventilation.
Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of
cleaners will damage the unit.
Avoid placing drinks or vases with water on top of the unit. This could increase the risk of fire or shock
hazard or damage to the unit.