Filter
Top Products
Chapter 1 13
Connections & Setup
MENU
TIME
VIDEO ADJUST
AUDIO ADJUST
CLOSED CAPTION
TIMER RECORDINGS
LANGUAGE
SETTING
V-CHIP BLOCK
SELECT / : SET OK
PREVIOUS : QUIT MENU
SETTING
FUNCTION
AUTO CH PRESET
CH SEARCH
CH MEMORY
CABLE
SELECT / : SET OK
PREVIOUS : QUIT MENU
CH MEMORY
AIR 54
ADD
SELECT / : SET OK
PREVIOUS : QUIT MENU
Setting the Clock
The TV/VCR has an automatic clock setting feature that automatically sets the
time from an EDS (Extended Data Service) channel when the power is turned
off. If there is no EDS channel, the signal is weak, or you don’t want to wait for
the time to be downloaded to the TV, you can set the clock manually
(instructions are on page 35).
To set the clock.
1. Display the TIME menu, use the up or down arrow to select CLOCK SET and
press OK.
2. The CLOCK SET screen appears. Press the up or down arrow to select AUTO
CLOCK ON and press OK.
The indicator moves to EDS CH. If you know the EDS channel in your
area, use the up and down arrows to enter the number or select AUTO and
press OK.
Turn off the power. The clock is set automatically using the EDS signal. It
may take a few hours to set the clock.
Add or Erase Channels
You might want to add or erase some channels if they’re inactive, have weak
signals, or you don’t want them in your channel list. The channel list is the list
of channels that the TV/VCR tunes to when you press the channel up and/or
channel down buttons.
Note: Even if you erase a channel, you can still tune to it by pressing the
number buttons on the remote control.
1. Press MENU on the remote (the main MENU appears).
2. Press down arrow button to highlight SETTING.
3. Press OK (the SETTING menu appears).
4. Press the down arrow button to highlight CH MEMORY.
5. Press OK (the CH MEMORY menu appears). Follow the on-screen directions
to ADD or ERASE a channel.
6. You can add or erase more channels by entering the channel number or
pressing CH + or CH –.
7. To exit, press the MENU button.
TIME
TIMER
CLOCK SET
SELECT / : SET OK
PREVIOUS : QUIT MENU
CLOCK SET
AUTO CLOCK ON
EDS CH AUTO
MONTH ---
DAY ---
YEAR ----
TIME --:----
SELECT / : SET OK
PREVIOUS : QUIT MENU