Filter
Top Products
Using the TV/VCR’s Features
28 Chapter 3
3. Press the right arrow button to select NEXT and press OK.
4. Press the up or down arrow button to scroll through the MODE settings
(i.e., how often): DAILY--every day, MON-SAT – Monday through Saturday,
MON-FRI, – weekdays, or a certain day of the week) and press OK.
5. Press the up or down arrow button until the correct channel appears in the
CH field, and press OK to set it.
6. Use the up or down arrow buttons and the OK button to enter the hour
and minutes for the START and STOP time and SPEED (SP or EP).
7. Review the information to make sure it is correct, and then use the left or
right arrow button to select COMPLETE if you are finished or NEXT if you
wish to enter another program.
The data includes the date, channel number, start and end times (including
AM or PM), and speed. To correct a previous entry during a timer setting,
use the left arrow to select the item you want to change, and press OK.
8. Repeat steps 4-7 for additional programs.
9. Insert a tape with safety tab intact before the recording is to begin. Press
the TIMER button on the remote. The PROGRAM EVENT indicator on the
TV/VCR’s front panel will light when a timer recording is set.
Note: If you press the TIMER button and haven’t put a tape in the TV/VCR,
the PROGRAM EVENT indicator will flash. If you’ve inserted a tape that
has had its safety tab removed, the tape will be ejected.
10. For cable box or satellite receiver, turn it on and tune it to the channel you
want to record before the recording is to begin.
Notes: To operate the TV/VCR when the PROGRAM EVENT indicator is on,
press TIMER on the remote to turn off the indicator. When you are
finished, be sure to insert a tape and press the TIMER button to set the
TV/VCR.
If two programs overlap, the end recording time of the first program will
have priority over the start of the second program.
REC TIMER PROGRAM
MODE CH START STOP
1
2
3
4
5
COMPLETE NEXT CHANGE DELETE
10:20AM OCT.15(MON)
SELECT / : SET OK
PREVIOUS : QUIT MENU
REC TIMER PROGRAM
MODE CH START STOP
1 DAILY 10 4:30PM 6:30PM SP
2 MON-FRI 58 10:00AM 11:30AM EP
3 20(SAT) 56 11:30AM 1:20PM SP
4
5
COMPLETE NEXT CHANGE DELETE
SELECT PROGRAM TO DELETE
10:20AM OCT.15(MON)
SELECT / : SET OK
PREVIOUS : QUIT MENU
REC RESERVATION-1
MODE FRI.19
CH 10
START 4:30PM
STOP 6:30PM
SPEED SP
10:20AM OCT.15(MON)
SELECT / : SET OK
PREVIOUS : QUIT MENU
REC TIMER PROGRAM
MODE CH START STOP
1 FRI 10 4:30PM 6:30PM SP
2
3
4
5
COMPLETE NEXT CHANGE DELETE
10:20AM OCT.15(MON)
SELECT / : SET OK
PREVIOUS : QUIT MENU
Check, Change, or Delete Timer Recordings
If the PROGRAM EVENT indicator on the front panel of the TV/VCR is lit, you
must press the TIMER button on the remote to turn it off before you can change
or delete a program.
1. Press MENU (the main MENU appears).
2. Press the up or down arrow button to select TIMER RECORDINGS and press
OK (the REC TIMER PROGRAM menu appears).
3. To change a program, use the left or right arrow buttons to select CHANGE
and press OK. Use the up or down arrow to select the program you want
to change and re-enter the program.
MENU
TIME
VIDEO ADJUST
AUDIO ADJUST
CLOSED CAPTION
TIMER RECORDINGS
LANGUAGE
SETTING
V-CHIP BLOCK
SELECT / : SET OK
PREVIOUS : QUIT MENU