Filter
Top Products
Safety instructions
3ENGLISH
As a rule once screen burns have occurred they cannot be reversed.
To avoid or reduce screen burns please take heed of the following directions and recommendations:
D during the first 100 operating hours mainly moving images or frequently changing still images should be displayed as a
full screen
D use your plasma TV on a screen-filling format (16:9)
D always activate the screen saver when using it as a PC display
D display moving images as far as possible
D always switch off the plasma TV when it is not being used
D reduce as much as possible the contrast and brightness
D wherever possible display images with lots of colours and colour shades.
Unfavourable conditions can cause your plasma TV to hum.The humming generally comes from the mains voltage supply and
can occur through the connection of differentearth conductors.You can provide a remedy by putting a so -called sheath current
filter between the incoming aerial lead and the aerial input socket on the plasma TV. Sheath current filters are available in the
retail trade in the form of a small inline plug.
Fortechnicalreasonstheunitcangeneratenoiseinsideitself.However,thismustnotexceedthevaluespecifiedintheappliance
specification.
If your plasma TV is connected to an external aerial, the latter must be earthed as protection against electric shocks and static
charging. The earthing must comply with the valid regulations.
Forergonomic reasons werecommend that youavoid the use ofred orblue fontsor symbols on darkbackgrounds. Onaccount
of the poor contrast such a display causes poor legibility and causes early eye fatigue. Therefore please use displays that are
rich in contrast, e.g. black font on a white background.
To avoid aching eyesand obtainan optimizedviewing distance,the distancefromtheunitshouldbefivetosixtimesthedisplay’s
diagonaldimension.Inyourtelevisionroomitshouldbesolightthatyoucouldalsoread.Thecontrastislostwithtoomuchbright-
ness. Too little light strains the eyes due to the alternation between light and dark on the display.
Whenconnectingexternalloudspeakerstakeheed ofthetechnicalspecificationsofthe loudspeakeroutput.Iftheloudspeakers
are insufficiently dimensioned, the loudspeakers and/or integrated amplifiers can be ruined.
Waste disposal
Ifyou want to dispose this unit,do not mix it with general household waste. There is a separate collection system for
used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
This unit and its packaging have been produced largely from materials that can be disposed of in an environmentally friendly
manner and that can be properly recycled.
After use the unit will be taken back for reuse or recycling, provided that it is handed back in a condition that corresponds to its
use having been in compliance with the intended use.
Any non -recyclable parts of the unit will be disposed of in the proper manner.
If you have any questions about disposal, please contact the place where you purchased the unit or our service department.
Cleaning
Before you start any cleaning, turn off the unit and unplug the mains plug from the plug receptacle.
Cleaning the plasma TV
Use a glass cleaning product with a soft cloth for cleaning the plasma TV. Do not use any abrasives!
Cleaning the casing
Donotuseanychemicalsolventsorcleaningagentsforcleaningthe casing,otherwise thesurface ofthe unitcould bedamaged.
If you clean the surface of the casing with a wet cloth, drops of water can get into the unit, which will cause malfunctions.
Use a vacuum cleaner with a soft brush attachment for cleaning the ventilation apertures.
ENGLISH