Filter
Top Products
General operation
18 ENGLISH
Picture format
D Auto Zoom
This function evaluates the current picture format and switches automatically between ”FULL SCREEN” and
”4:3 LETTERBOX TO 16:9”.
Under the option <DISPLAY ⇒ ZOOM>,you can set the preset picture formats. Manual format selection is possible only if ”Off”
is set under the option <AUTO ZOOM>.
D Panorama
This format setting automatically scales the input signal,horizontally and vertically, so that the picture fills the entire screen,
but notlinearly, i.e.the picture’s content in the centre of the screen is displayed like the original and towards the edges more
intense scaling takes place.
D Normal (4:3)
This format setting displays a PAL 4:3 picture with the correct side ratio. Dark stripes are visible on the left and right-hand
edges of the picture.
D Full screen
In this format setting the picture is adjusted horizontally and vertically so that a full screen is always displayed.
D User zoom
If you select User zoom, the option <USER ZOOM> is displayed in the menu.
With this option you can display an individual picture format ranging from 40 to 160% of the original picture s ize.
The value is set in increments of 6 %.
D 4:3 Letterbox to 16:9 - centred picture in 16:9 letterbox format
D 16:9 Top - picture in 16:9 letterbox format with subtitles
D 14:9 - centred image in 14:9 letterbox format
D 14:9 Top - picture in 14:9 letterbox format with subtitles
To toggle between the formats, press the [F
] button repeatedly.
Auto Zoom: Off
Zoom: Userzoom
Color Temperature: USER
Picture Contrast: Ideal
Freeze Picture "
User Color Temp >
This option is displayed only if
”Userzoom” is set under
<ZOOM>.
User Zoom:
Userzoom
Full screen
Normal (4:3)
14:9
14:9 Top
4:3 Letterbox to 16:9
16:9 Top
Panorama
Fill AR
1:1
These options are available only with the
setting <INPUTS / PIP ⇒ MAIN INPUT>
”PC (RGB) / PC(RGB)” !
Input / PIP >
Picture >
Display >
Sound >
Set Up >
Info >
←
D Button [AUTO] on the remote control
To switch the function “Auto Zoom” on, by pressing the [AUTO] button.
Display the main menu by pressing the [MENU] button. Select the menu option[DISPLAY] and then [AUTO ZOOM]. To switch
the function “Auto Zoom” off, by pressing the [
"] button.
To change the formats by pressing the [F
] button.