Runco CX-46HD Home Theater Screen User Manual


 
Controls and Functions
Runco CX-40HD/CX-46HD Owner’s Operating Manual 7
PRE
L
IMINAR
Y
9. HDMI2/Computer Input (Digital)
Two, HDCP-compliant digital video inputs for connecting a DVD player, personal
computer or HD tuner with a DVI or HDMI output.
10. PC Audio Input
Connect the audio output from a personal computer here.
11. INPUT3 Component Video (RCA connectors)
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component
input. This is the input for component video from sources such as DVD players.
12. INPUT3 Composite Video Input
13. INPUT3 Audio Input
Connect the audio output from your Input 3 source here.
14. INPUT4 Component Video (RCA connectors)
Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component
input. This is the input for component video from sources such as DVD players.
15. INPUT4 Composite Video Input
16. INPUT4 Audio Input
Connect the audio output from your Input 4 source here.
17. INPUT1 Composite Video Input
18. INPUT1 Audio Input
Connect the audio output from your Input 1 source here.
19. INPUT1 S-Video Input
20. AV-OUT (Composite Video)
21. AV-OUT (Audio)
22. DIGITAL AUDIO OUT (S/PDIF – Coaxial)
23. DIGITAL AUDIO OUT (TosLink – Optical)
Connect either #22 or #23 to the digital audio input of an A/V amplifier with a Dolby
Digital
®
decoder.
24. AIR (Antenna) Input
75-ohm coaxial input for connecting a TV antenna to the digital TV input.
25. CABLE Input
75-ohm coaxial input for connecting a CATV system to the digital TV input.
26. RS-232 CONTROL PORT
A female, 9-pin D-sub connector for interfacing with a PC or home theater
automation/control system.
27. SPEAKER OUTPUT (RIGHT)
28. SPEAKER OUTPUT (LEFT)
For connection of the right (27) left (28) speakers. Connect a speaker with an
impedance of 4 ohms.
For best results, do not run your DVD player in progressive mode.
Tip