Filter
Top Products
Installation
16 Runco VX-2ix Owner’s Operating Manual
Throw Distance Throw distance is the distance measured from the front of the projector to the screen.
This is an important calculation in any projector installation as it determines whether or not
you have enough room to install your projector with a desired screen size and if your
image will be the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and
multiplying it by the lens throw ratio; see
Figure 3-1. The result of this calculation tells you
roughly how far back the projector should be positioned from the screen in order to
project a focused image large enough to fill the screen.
Figure 3-1. Estimating Throw Distance
Table 3-3 lists the available lens options for the VX-2ix and their associated throw ratios.
➤
Table 3-3. VX-2ix Lens Options and Throw Ratios
Lens Option
(Note 2)
Throw Ratio
with Primary
Lens Only
Throw Range in
inches, with
96x54-inch (1.78:1)
Screen
Throw Ratio
with Primary
Lens and
Anamorphic
Lens
Throw Range in
inches, with
126.9x54-inch (2.35:1)
Screen
Minimum Maximum Minimum Maximum
Proteus A
0.64 (Fixed)
For rear-screen installa-
tions only. Contact
Runco Technical Support
for more information.
Not Applicable
(Note 2)
Proteus B
1.22 - 1.44 117.12 138.24
Proteus C
1.45 - 1.76 139.20 168.96
Proteus D
1.82 - 2.39 174.72 229.44 1.39 - 1.77 176.39 224.61
Proteus E
2.42 - 3.57 232.32 342.72 1.84 - 2.64 233.50 335.02
Proteus F
3.63 - 5.72 348.48 549.12 2.75 - 4.26 348.98 540.59
Notes:
1. Throw distance does not affect image quality, provided these ranges are taken into account.
2. Only the Proteus D, E and F lenses can be used with the optional CineWide (secondary
anamorphic) lens. Doing so affects the throw distances as shown here.
Estimating Throw Distance
Throw Distance (TD) = Screen Width (w) x Lens Throw Ratio
Screen width (w)
TD