Filter
Top Products
Specifications
58 Runco VX-2ix Owner’s Operating Manual
Brightness and Contrast: Cinema Standards Measurement System (CSMS)
Specifications
- Brightness: 52.1 foot-Lamberts (fL)
- Contrast Ratio: 271:1
These measurements are taken from the projector in a controlled,
home theater environment. All measurements are made to
ANSI/NAPM IT7.228-1997 specifications using the Photo Research
PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter,
Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The
projector is calibrated to a color temperature of 6,500K and has a
minimum of 150 hours of usage.
The foot-Lambert (fL) is the unit of measurement used in commercial
movie theaters to express image brightness at the screen surface. The
Society of Motion Picture and Television Engineers (SMPTE) specifies
16 fL as the target image brightness for film-based projectors using an
open gate (without film in the projector). More importantly, today
SMPTE specifies 12 fL as the target image brightness in Digital
Cinema theaters. The foot-Lambert measurement is dependent on
screen size, screen gain and projector light output.
Home Theater Calibration Specifications
- Light Output: 1227 ANSI Lumens
- Contrast Ratio: 271:1
These specifications are obtained by calibrating the projector as
described above for CSMS measurements.
Industry-Standard Specifications
- Light Output: 2500 ANSI Lumens
- Contrast Ratio: 3100:1
These are typical projector brightness and contrast specifications
found in most companies’ sales literature. Runco includes these
measurements in its literature to allow for direct comparison with other
manufacturers’ projectors. These measurements are typically taken at
9,000K to 13,000K to get expected performance data when the
projector is used in professional, commercial and industrial displays.
Lamp: 275 Watts
Estimated Lamp Life: 2000 hours
Inputs: (1) Composite; (2) S-Video; (1) Component; (2) HD-R (Pr), G
(Y), B (Pb), H, V; (2) DVI w/HDCP
Control Options: - Built-in keypad
- Discrete infrared remote
- Serial commands via RS-232
Trigger Outputs: (3) +12 VDC, each rated at 750 mA and thermal
fuse-protected
Bandwidth: 150 Mega Samples/Second (MSPS)
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 610 Watts
Operating Environment: 41°F to 95°F (5°C to 35°C), 0% to 90% humidity
(non-condensing)
Dimensions: See Figure 7-1
Weight (without lens): 84 lbs. (38.10 kg)
Regulatory Approvals: Complies with FCC, CE C-Tick
Table 7-1. VX-2ix Specifications (continued)