Runco VX-33i Installation/Operation Manual 69
PRE
L
IMINAR
Y
7.1
VX-33i Specifications
Table 7-1 lists the VX-33i specifications.
7. Specifications
Table 7-1. VX-33i Specifications
Projector Type: Digital Light Processing (DLP), 3-chip, 16:9 DMD
Native Resolution: 1920 x 1080 (16:9)
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema
Video Standards: NTSC, NTSC 4.43, PAL B/G/H/I/M/N , SECAM
DTV Compatibility: 480i/576i, 480p, 576p, 1080i 50/60, 720p 50/60,1080p
24/50/60, 1080psf
Scan Frequency: Horizontal: 15 - 100 kHz
Vertical: 28 - 78 Hz
Picture Size (16:9 Screen): Recommended Width: 72 - 120 in.
Maximum Width: 250 in.
Throw Distance
(Factor x Screen Width):
Refer to Table 3-3
Horizontal and Vertical
Offset:
Refer to Table 3-4
Lamp: 300W UHP
Estimated Lamp Life: 2000 hours
Inputs: (1) Composite
(1) S-Video
(1) HD Video, R (Pr), G (Y), B (Pb), H, V - RCA connectors
(1) HD Video/Computer, R (Pr), G (Y), B (Pb), H, V - BNCs
(1) HD Video/Computer, R (Pr), G (Y), B (Pb), H, V -
15-pin D-Sub connector
(2) HDMI with HDCP
Trigger Outputs: (3) +12 VDC, each rated at 750 mA and thermal
fuse-protected
Control Options: - Discrete infrared remote
- Serial commands via RS-232 interface
- Built-in keypad on rear panel
RS-232 Communication
Parameters:
19200 bps, no parity, 8 data bits, 1 stop bit, no flow control