Filter
Top Products
USER’S MANUAL
H.264 REAL TIME DVR
46
Setting a new preset position
1. Move the camera to a position using direction buttons (⑤).
2. Select the preset number to set using button (⑨).
3. Click button ⑪ “SET”.
4. Repeat steps 1 ~ 3 to set other preset positions.
※
You can set up to 10 preset positions.
※ Not all cameras are compatible with presets. Check your camera’s manual.
Moving camera to preset position
1. Select the preset number to move using button (⑨).
2. Click on the “GO” button (⑩)
※ Moving camera to preset position is only available when the camera supports
preset feature.
Deleting preset position
1. Select the preset number to delete using preset number button ⑨.
2. Click button ⑫ “CLEAR”.
※ Deleting preset position is only available when the camera supports.
Starting touring
1. Click button ⑬ “START”.
2. Then it will start traversing each preset position one by one.
Stopping touring
1. Click button ⑭ “STOP”.
2. Then it will stop touring.
Notice
If you change a preset position whilst in Touring mode, the
touring will automatically stop.