Filter
Top Products
Getting Started
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and an antenna or cable connection.
The PDP device may interfere with an amateur radio or AM radio.
When you move or swivel the TV with Antenna cable tightly connected, there is high risk antenna jack on TVwill be broken
off.
VHF/UHFAntenna
I
_ Powerinput
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. Toturn on
the _ Press the POWER (b button. Plug & Play is available onlywhen the input source is set to TV.
Plug & Play is available only when the Source isset to TV.
To return to the previous step, inthe Plug & Play sequence, press the red button on your remote.
Selecting the OSD
Language
Selecting Store Demo
or Home Use
Selecting an antenlqa
Press the 4 or _ button, and then press the A or T button to
select a _anguage.Press ENTERE_ when done. POWER
Press the _ or I_ button, then press the ENTERE_ button.
• Select the Home Use mode. Store Demo mode is for retail
environments.
• To return the unit's settings from Store Demo to Home Use
stanaaral: Press the volume button on the T_. When you
see tne volume OSD, press and hold MENU for 5 sec.
Press the A or T button, then press the ENTERI_ button. Select Air, Cable orAuto.
Selectinc ana
memorizing channels
Setung tne
Clock Mode
View the
HD Connection Guide.
The channe search will start automatically. This can take up to 30 minutes.
For more informatior., refer to Channel --_Auto Program inthe e-Manual.
Press the ENTERIZ_ button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
• Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
• Manual: Allows you to manually set the current date and time (p. 18).
The connection method for the best HD screen quality is displayed.
Enjoy your TV. Press the ENTER I_ button.
if You Want to Reset This Feature...
(_ MENU rrrl _ Setup -_ Plug & Play _ ENTERI_
NOTE
• To change the TV's setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume inthe OSD, press and hold MENU for 5 sec.
English