Filter
Top Products
English-5
Connecting a VCR
1
2
3
4
If you have a “mono” (non-stereo)
VCR, use a Y-connector (not
supplied) to hook up to the right
and left audio input jacks of the
TV. If your VCR is stereo, you
must connect two cables.
°
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
°
°
5
Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable between
the VIDEO OUT jack on the
VCR and the AV IN [VIDEO] jack
on the TV.
Unplug the cable or antenna
from the back of the TV.
Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN [R-AUDIO-L]
jacks on the TV.
Video Connection
S-Video Connection
TV Rear Panel
1
RF Cable
(Not supplied)
3
Audio Cable (Not supplied)
VCR Rear Panel
1
2
Connect an S-Video Cable
between the S-VIDEO OUT jack
on the VCR and the AV IN
[S-VIDEO] jack on the TV.
3
Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN [R-AUDIO-L]
jacks on the TV.
2
S-Video Cable (Not supplied)
To begin, follow steps 1–3 in
the previous section to connect
the antenna or cable to your
VCR and your TV.
An S-Video cable may be included
with a VCR. (If not, check your local
electronics store.)
Each VCR has a dif
ferent back
panel configuration.
When connecting a VCR, match
the color of the connection
terminal to the cable.
°
°
TV Rear Panel
5
Audio Cable (Not supplied)
3
RF Cable
(Not supplied)
4
Video Cable (Not supplied)
VCR Rear Panel