Filter
Top Products
English - 40
Upgrading the Software
To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as
part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You
are given the option to install the upgrade.
1.
Insert a USB rive containing the rmware upgrae into the SERVICE port on
the side of the TV.
2.
Press the MENU button to display the menu.
Press the or button to select “Setup”, then press the ENTER button.
3. Press the or button to select “Software Upgrae”, then press the
ENTER button.
4. Press the or button to select “BY USB”, “BY Channel” or “Stanby
Mode Upgrade”. Press the ENTER button.
BY USB :
- Preset : Insert a USB rive containing the rmware upgrae into TV.
Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The TV will turn off and turn on
automatically after completing the rmware upgrae. Please check the
rmware version after the upgraes are complete. When software is
upgraded, video and audio settings you have made will return to their
default (factory) settings. We recommend you write down your settings so
that you can easily reset them after the upgrade.
BY Channel :
Upgrades the software using the broadcasting signal.
Standby Mode Upgrade :
To continue software upgrade with master power on, Select On by pressing
the or button. 45 minutes after entering stanby moe, a manual
upgrade is automatically conducted. Since the power of the unit is turned
on internally, the screen may be on slightly for the LCD product. This
phenomenon may continue for more than 1 hour until the software upgrade is
completed.
Alternative Software :
To display the software version information.
➣
Setup
Entertainment : Off
Energy Saving : Off
SoftwareUpgrade ►
Common Interface
HDMI IN3HDMI IN3
TV Side Panel
USB Drive
Software Upgrade
Current Version 2008/01/01_000075
BY USB ►
BY Channel
Standby Mode Upgrade : On
Alternative Software ----/--/--_--------
ReturnEnter
Move
BN68-01424E-02Eng-0514.indd 40 2008-05-15 ¿ÀÀü 9:34:25