Filter
Top Products
English _27
● CONNECTIONS
CONNECTING TO A TV (VIDEO) - GOOD QUALITY
Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the bottom
of the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.
Turn on the Blu-ray Disc Player and TV.
Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears
on the TV screen.
If you have set the remote control to operate your TV (see pages 20~21), press the TV SOURCE button on
the remote control and select VIDEO as the external source of the TV.
Noise may be generated if the audio cable is placed too close to the power cable.
If you want to connect to an Amplifi er, please refer to the Amplifi er connection pages. (See pages 28~30)
The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
Blu-ray Disc Player.
The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.
(See page 44)
1.
2.
3.
•
M
WhiteRed Yellow
Audio/Video cable
01799B-BD-P4600-XAC-ENG.indb 27 2009-07-14 오후 4:21:42