English _63
● SYSTEM UPGRADE
There should be only one fi rmware upgrade fi le in the USB fl ash drive for the player to properly perform an
upgrade.
Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.
SYSTEM INFORMATION
When the fi rmware upgrade is done, check the fi rmware details by following the steps below.
With the unit in Stop mode/No Disc mode, press the
MENU button.
Press the ENTER or
+
button.
Press the
▲▼
buttons to select Setup, then press the
ENTER or
+
button.
Press the
▲▼
buttons to select System, then press the
ENTER or
+
button.
Press the
▲▼
buttons to select System Information,
then press the ENTER or
+
button.
You can see detailed information about the current
fi rmware.
Press the ENTER button to select OK.
System setup menu will be displayed.
FIRMWARE UPGRADE NOTIFICATION
The popup menu appears when a newer version of the fi rmware is available from SAMSUNG update server than
that of the Blu-ray Disc Player, if the Blu-ray Disc Player is connected to the network and powered on.
Yes
: Select this to upgrade now.
No : Select this if you plan to upgrade later.
1.
2.
3.
4.
5.
6.
•
•
System Update
New Firmware is available.
Do you want to update now?
Yes No
When the fi rmware upgrade is done, check the fi rmware details by following the steps below.
When the fi rmware upgrade is done, check the fi rmware details by following the steps below.
System
►
Language
Audio
Display
HDMI
Network
Parental
No disc
Music
Photo
Setup
_
System
◄
Language
Audio
Display
HDMI
Network
Parental
System Information
►
Time Zone
Clock Set
Power On/Off sound : On
Touch Key Sound : On
BD Data Management
DivX(R) Registration
No disc
Music
Photo
Setup
System
◄
Language
Audio
Display
HDMI
Network
Parental
System Information
►
Time Zone
Clock Set
Power On/Off sound :
Touch Key Sound :
BD Data Management
DivX(R) Registration
No disc
Music
Photo
Setup
System Information
S/W : XXXXXXX
Loader : XXXXXXX
Region : A/1 (BD/DVD)
ESN : XXXX
OK
01799B-BD-P4600-XAC-ENG.indb 63 2009-07-14 오후 4:23:53