Filter
Top Products
You can automatically or manually tune in to FM and AM stations
to listen to radio broadcasts.
1 Press the FM/AM button.
• Each time you press the button, the band alternates between
FM and AM.
2 Tune in to a station.
• Automatic tuning : Hold down
l
➛➛
/
❿❿
l
to begin the
automatic tuning.
• Manual tuning : Press
l
➛➛
to tune in to a lower frequency, or
press
❿❿
l
to tune in to a higher frequency.
➢ The FM/AM function cannot be selected while operating the
DVD player or VCR.
Example: Storing an FM station of 89.1 MHz into the preset number
02 of the FM1 band
1 Press the FM/AM button to select the FM band.
• Each time you press the button, the band alternates between
FM and AM.
2 Select a channel to choose the memory address to which you want
to store the station.
3 Use the
➛➛
and
❿❿
buttons to tune in to 89.1 FM.
4 Press the
■
button or the ENTER button on the remote control.
• 89.1 FM is stored in FM1.
➢ To store other channels, repeat the steps 2 to 4 above.
Listening to radio broadcasts
Presetting stations
55
SOUND mode/effect function
This feature simulates the sound of different acoustic spaces.
1 Press the SOUND MODE button.
• Each time you press the button,
the sound mode changes as
follows.
• The SOUND mode adds an acoustic
surround effect during playback of
stereo analog or linear PCM digital
signals.
2 Press the SOUND EFFECT button.
• Each time you press the button, the selection alternates between
EFFECT 1 and EFFECT 2.
• The higher the number, the greater the effect.
• If you press the button while in the STEREO mode, the selection
alternates between STEREO and 4 STEREO.
• When in 4 STEREO mode, you’ll hear equal output from the front
and rear speakers.
54
1
2
1
2
2
2
1
3
3
4
PL II
NAT (NATURAL)
JAZZ
CON (CONCERT)
STA (STADIUM)
Dolby Pro Logic II
●● : 5.1ch
▲▲ : STEREO
✕ : Not available
ON
Mode
D PL II STEREO NATURAL JAZZ CONCERT STADIUM
Video Tape ●● ▲▲ ●● ●● ●● ●●
TV, FM/AM ●● ▲▲ ●● ●● ●● ●●
AUX ●● ▲▲ ●● ●● ●● ●●
Source
OFF
D
➢ ◆ The Sound mode and effects do not Work With Dolby Digital, DTS, MP3, and LPCM
disc sources.
◆ Dolby Digital, DTS : 5.1-Channel speaker output
◆ MP3, LPCM : Outputs to the front left, right, and subwoofer speakers only.
◆ During DTS or MPEG playback, audio is output only to the speakers.
Audio is not output using other connections.