Filter
Top Products
19
Tuner Band Setting
This feature allows you to manually set the DVD-VCR’s tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
• Use this setting only if Auto Setup detected the incorrect tuner
band, i.e. channels are coming in on the wrong channel numbers.
1 Open “MENU”
With the DVD in stop mode, press the MENU button.
2 Select “Install”
Using the up/down and left/right buttons, move the selection cursor
to “Installation”, then press ENTER to select.
3 Select “Channel Setup”
Using the up/down and left/right buttons, move the selection cursor
to “Channel Setup”, then press ENTER to select.
4 Select “Ant/Cable”
Move the selection arrow to “Ant/Cable” then press right to select
from the following options:
• Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
• Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
1
18
If Auto Setup was unable to find a local TV station to set the DVD-
VCR’s internal clock, follow these instructions to set the date/time
manually.
NOTE: It is important to set the clock for accurate Timer
Recording.
1 Open “MENU”
With the DVD in stop mode, press the MENU button.
2 Select “Clock”
Using the up/down and left/right buttons, move the selection cursor
to “Clock Set/Adjust,” then press ENTER to select.
3 Select “Manual”
Move the selection arrow to “Manual”, then press ENTER to select.
4 Set the Clock
Press LEFT/RIGHT to select each of the following options, then
press UP/DOWN to set each option:
• Set Hour – Set the hour using the up and down buttons.
• Set Minute – Set the minute using the up and down buttons.
• Set Month – Set the month using the up and down buttons.
• Set Day – Set the day using the up and down buttons.
• Set Year – Set the year using the up and down buttons.
5 Confirm Settings
Press the RETURN button to save your clock settings and return to
the Setup menu.
• Press Return again to exit.
Manual Clock Set
2,3
1
MAIN MENU
Clock Set/Adjust
RETURN
➐❷☎☎☎
➛☎❿
ENTER
Program Clock Install Exit
DVD VCR Options Language
Clock
CLOCK SET/ADJUST
TIME DATE YEAR
12:00
A
M
1/01 2003 Wed
RETURN
➐❷☎☎☎
➛☎❿
CLOCK SET/ADJUST
Auto
❿
Manual
RETURN
➐❷☎☎☎☎☎☎☎☎☎☎
ENTER
MAIN MENU
Installation
RETURN
➐❷☎☎☎
➛☎❿
ENTER
Program Clock Install Exit
DVD VCR Options Language
Install
INSTALLATION
❿
Channel setup
Volume light : [Auto]
RETURN
➐❷☎☎☎☎☎☎☎☎☎
ENTER
CHANNEL SETUP
❿
Ant/Cable: [Cable TV]
Auto channel memory
Channel add/delete
RETURN
➐❷☎☎☎
➛☎❿
CHANNEL SETUP
❿
Ant/Cable: [Antenna]
Auto channel memory
Channel add/delete
RETURN
➐❷☎☎☎
➛☎❿