Filter
Top Products
System Setup
English - 31
Manual Channel Set
Manual Channel Set can be used after you have fi rst performed
Auto Channel Memory. Use the Manual Channel Setting to delete
unnecessary channels.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select Channel Set, then press the ENTER
or ► button.
4. Press the ▲▼ buttons to select Channel Add/Delete, then press the
ENTER or ► button.
5. Press the ▲▼ or number buttons to select the channels you want to
add or delete on the Select channel screen. Then, press the ENTER
button.
• Using CH (
) buttons for channel selection allows the user to
add/delete one channel at a time.
• Using ▲▼ buttons for channel selection jumps to the next channel
memorized in Auto Channel Memory.
6. Press the ◄► buttons to select Add or Delete, then press the ENTER
button.
• The message “Channel is added.” or “Channel is deleted.” will be
displayed in the center of the screen.
• Continue to add or delete as many channels as you want to memorize
or delete. This can be used to add channels not stored automatically
due to weak signal strength.
• Press the RETURN button to return to the previous menu. Press the
EXIT button to exit the menu.
Channel Set
DVD-Recorder
No Disc
Timer Rec.Timer Rec.
SetupSetup
Antenna/Cable TV : Antenna
►
Auto Channel Memory
►
Channel Add/Delete
►
MOVE ENTER RETURN EXIT
Channel Add/Delete
DVD-Recorder
No Disc
Timer Rec.Timer Rec.
SetupSetup
Select channel : 2
Add Delete
ENTER RETURN EXITNUMBER
0~9
01378A-AR650-XAA-ENG.indb 3101378A-AR650-XAA-ENG.indb 31 2007-03-13 오전 11:54:532007-03-13 오전 11:54:53