Filter
Top Products
System Setup
English - 32
Setting Up the System Options
Set Top Box Control
If you have your cable box/satellite receiver(set top box) connected
as shown on page 16, it can be controlled after setting up this menu.
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
Menu items differ depending on the disc type.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select Set Top Box Control using the ▲▼ buttons, then press the
ENTER or ► button.
Set Top Box Control menu will be displayed.
5. Select the desired sub menu(Control, Connection, CH Digit Lock,
Mode for SET button, and Brand Code) using the ▲▼ buttons, then
press the ENTER or ► button.
Control
Select the sub item(Off or On) using the ▲▼ buttons, then press the
ENTER button.
• Off : Turns off the cable box or satellite receiver (set top box) control
function. Select this if you do not want to use the supplied cable box
controller (IR Blaster).
• On : Turns on the cable box or satellite receiver (set top box) control
function.
Connection
Select the sub item (AV1, S-Video, CH3, CH4, AV2) using the ▲▼
buttons, then press the ENTER button.
If you connect your cable box or satellite receiver (set top box) to the
recorder's audio/video input. (page 16)
• AV1
: Select this when the cable box or satellite receiver (set top box) is
connected to the DVD recorder's AV 1 IN jacks.
You can watch the output of the cable box or satellite receiver (set top box)
connected to AV1 when the Recorder is powered off.
• S-Video : Select this when the cable box or satellite receiver (set top box)
is connected to the DVD recorder's S-Video IN jack.
You can't select AV1 when the cable box or satellite receiver (set top box)
is connected to the S-Video input.
• AV2 : Select this when the cable box or satellite receiver (set top box) is
connected to the DVD recorder's AV 2 IN jacks.
If you connect your cable box or satellite receiver (set top box) to the
recorder's antenna input. (page 16)
• CH3 or CH4 : Select the output channel from CH3 or CH4 when the
cable box or satellite receiver (set top box) is connected to the DVD
recorder's VHF/UHF IN jack.
See the instruction supplied with your cable box or satellite
receiver (set top box) to confi rm the box's antenna output channel.
▌
■
System
DVD-Recorder
No Disc
Set Top Box Control
►
CM Skip Time : 15 Sec
►
EP Mode Time : 6 Hours
►
Chapter Creator : Off
►
Quick Recording : Off
►
Anynet+(HDMI-CEC) : On
►
Timer Rec.Timer Rec.
SetupSetup
MOVE ENTER RETURN EXIT
Set Top Box Control
DVD-Recorder
No Disc
Timer Rec.Timer Rec.
SetupSetup
Control : Off
►
Connection : CH3
►
CH Digit Lock : Off
►
Mode for SET button : Off
►
Brand Code : 0000
►
MOVE ENTER RETURN EXIT
Off
On
Set Top Box Control
DVD-Recorder
No Disc
Timer Rec.Timer Rec.
SetupSetup
Control : Off
►
Connection : CH3
►
CH Digit Lock : Off
►
Mode for SET button : Off
►
Brand Code : 0000
►
MOVE ENTER RETURN EXIT
CH3
CH4
AV1
AV2
Set Top Box Control
DVD-Recorder
No Disc
Timer Rec.Timer Rec.
SetupSetup
Control : Off
►
Connection : CH3
►
CH Digit Lock : Off
►
Mode for SET button : Off
►
Brand Code : 0000
►
MOVE ENTER RETURN EXIT
CH3
CH4
AV1
AV2
01378A-AR650-XAA-ENG.indb 3201378A-AR650-XAA-ENG.indb 32 2007-03-13 오전 11:54:552007-03-13 오전 11:54:55