Filter
Top Products
Getting Started
English - 10
Step 4 : Playing
To start playback select the title you want to play from the
Title list.
A DVD consists of sections called titles, and sub sections
called chapters.
During recording, a title is created between two points
where you start and stop recording. Chapters will be
created automatically when you fi nalize recording on
DVD-R/DVD-RW discs in Video mode.
Step 5 : Editing a recorded disc
Editing on discs is easier than editing on conventional
video tapes. The recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate various
edit functions, such as delete, copy, rename, lock, etc., on
a recorded title.
With this recorder, you can create playlists using a DVD-
RAM/DVD-RW in VR mode. Once a playlist is created you
can create/edit a new playlist on the same disc without
changing the original recording.
Step 6
:
Finalizing & Playing on other
DVD components
To play your DVD on other DVD components, fi nalizing
may be necessary. First, fi nish all editing and recording
operations, then fi nalize the disc.
When using a DVD-RW disc in VR Mode
Although fi nalizing is generally unnecessary when playing
the disc on a VR Mode compatible component, a fi nalized
disc should be used for playback.
When using a DVD-RW disc in Video Mode
The disc should be fi nalized fi rst to enable playback
on anything other than this recorder. No more editing
or recording can be made on the disc once it has been
fi nalized.
When using a DVD-R disc
You should fi nalize the disc to play it on a component
other than this recorder. No more editing or recording can
be made on the disc once it has been fi nalized.
You can fi nalize automatically using the EZ REC
MODE. (See page 54)
▌
▌
▌
■
Unpacking
Accessories
Check for the supplied accessories below.
Preparing the Remote Control
Install Batteries in the Remote Control
• Open the battery cover on the back of the remote.
• Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
• Replace the battery cover.
If the remote control does not operate properly:
• Check the polarity +/- of the batteries.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fl uorescent lighting nearby.
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
▌
▌
IR Blaster cable
(AK39-00055A)
Video/Audio Cable
(AC39-00073A)
Quick Guide
(AK68-01379A)
Instruction Manual
(AK68-01378A)
Remote Control
(AK59-00062J)
Batteries for Remote
Control (AAA Size)
(AC43-12002H)
01378A-AR650-XAA-ENG.indb 1001378A-AR650-XAA-ENG.indb 10 2007-03-13 오전 11:54:132007-03-13 오전 11:54:13