Filter
Top Products
36 - English
System Setup
HDMI/DVI Resolution
This setting is used when the unit is connected by
HDMI or DVI with Display devices (TV, projector,etc).
• 480p : 720 x 480
• 720p : 1280 x 720
• 1080i : 1920 x 1080
Connect the DVD-R155 to your TV via HDMI or
DVI. Set your TV's input to HDMI or DVI.
• Press the P.SCAN button while the unit is in stop
mode to select the output resolution.
- If your TV is connected the HDMI or DVI cable, the
output resolution mode changes in the following
sequence each time you press the P.SCAN button:
➞
480p
➞
720p
➞
1080i
- If the DVD Recorder is connected to your TV with
Component cables(no HDMI/DVI cable connected),
the output resolution mode toggles between
480p/480i.
DivX(R) Registration
Please use the Registration code to register your DVD
Recorder with the DivX(R) Video On Demand format.
To learn more, visit www.divx.com/vod.
TV Aspect
: 16:9 Wide
√√
Input Level : Darker
√√
Black Level : 7.5 IRE
√√
3D Noise Reduction
: Off
√√
HDMI/DVI Resolution
: 480P
√√
DivX(R) Registration
√√
480P
720P
1080i
Video
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
TV Aspect
: 16:9 Wide
√√
Input Level : Darker
√√
Black Level : 7.5 IRE
√√
3D Noise Reduction
: Off
√√
HDMI/DVI Resolution
: 480P
√√
DivX(R) Registration
√√
Video
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
Your registration code is :
ZRNK8G54
To learn more, visit www.divx.com/vod
DivX(R) Video On Demand
OK
■
IRE: Short for the Institute of Radio
Engineers. An IRE unit is a relative unit of
measure equaling 1/140th of the peak-to
peak (p-p) video amplitude.
NOTE
The Parental Control function works in conjunction with
DVDs that have been assigned a rating - which helps you
control the types of DVDs that your family watches. There
are up to 8 rating levels on a disc.
1
With the unit in Stop mode/No Disc mode, press the
MENU button on the remote control.
2
Select Setup using the …† buttons, then press the
ENTER or √ button.
3
Select Parental Control using the …† buttons, then
press the ENTER or √ button.
4
The first time the Parental Control is accessed, the
‘Create the Password’ message will be displayed.
Create a 4-digit password using the 0 to 9 buttons on the
remote control.
5
The Re-enter Password screen appears to confirm
the password. Enter your password again.
6
Press the ENTER or √ button, and then select On
using the …† buttons.
The Parental Control screen appears.
Parental Control
NUMBER
Parental Control
DVD-Recorder
Timer Rec.
Setup
No Disc
Create the password
0~9
RETURNENTER EXIT