Samsung DVD-SH897M DVD Player User Manual


  Open as PDF
of 116
 
_ System setup
System setup

You can connect the HDD & DVD Recorder to an external amp or Home theatre.
Allows you to setup the Audio device and sound status depending on the audio system in use.
You can also set NICAM mode.
With the unit in Stop mode, press the  button.
Press the
$%
buttons to select , then press the  or
+
button.
Press the
$%
buttons to select , then press the  or
+
button.
Press the
$%
buttons to select the desired audio option, then
press the  or
+
button.
Press the
$%
buttons to select the desired item, then press the
 or
+
button.

 : Select this when your equipment is not Dolby Digital
(or MPEG-2) compatible.
 : Outputs Dolby Digital (or MPEG-2) audio as bitstream.
Select this when your AV receiver or AV amplier has a
Dolby Digital (or MPEG-2) Decoder.
Digital output setting is equally applied to both Dolby Digital and MPEG-2 audio. LPCM sound track is always
outputted as PCM. It has no relation with Digital Output setting.
Be sure to select the correct Digital Output or you will hear no sound or a loud noise.
DTS
 : Doesn’t output DTS signal. Select this when your AV receiver
(or AV amplier) does not have DTS decoder.
 : Outputs DTS Bitstream via digital output when you play DTS
track. Select this only when your AV receiver (or AV amplier)
have DTS decoder.
When DTS soundtrack is played, sound does not output from
AV Audio Output.
DRC
This is only active when a Dolby Digital signal is detected.
 : When Movie soundtracks are played at low volume or from
smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
 : You can enjoy the movie with the standard Dynamic Range.
1.
.
.
.
.
•
•
M
•
•
M
•
•
Audio
HDD & DVD RECORDER
HDD
Digital Output : PCM ►
DTS : Off ►
DRC : On ►
NICAM : On ►
m MOVE sSELECT rRETURN eEXIT
Library
Guide
Channel
Timer Record
Disc Manager
Setup
PCM ✔
Bitstream
Audio
HDD & DVD RECORDER
HDD
Digital Output : PCM ►
DTS : Off ►
DRC : On ►
NICAM : On ►
m MOVE sSELECT rRETURN eEXIT
Library
Guide
Channel
Timer Record
Disc Manager
Setup
Off ✔
On
Audio
HDD & DVD RECORDER
HDD
Digital Output : PCM ►
DTS : Off ►
DRC : On ►
NICAM : On ►
m MOVE sSELECT rRETURN eEXIT
Library
Guide
Channel
Timer Record
Disc Manager
Setup
Off
On
✔
Setup
HDD & DVD RECORDER
HDD
System ►
Clock Set ►
Language ►
Audio ►
Video ►
Parental Lock 1 ►
Recording ►
m MOVE sSELECT rRETURN eEXIT
Library
Guide
Channel
Timer Record
Disc Manager
Setup
 previous next