Samsung DVD-V6700- DVD Player User Manual


 
ENG-15
C
ONNECTIONS
Connecting to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(Y), blue(P
B
), and red(P
R
) signals to present clear and clean images. (Audio
signals are delivered through the audio out (red and white) or line out(red and white) jacks).
1
Using component video cables (not included),
connect the
COMPONENT VIDEO OUT jack on
the back of the DVD-VCR to the
COMPONENT
IN
jack of your TV.
2
Using the audio cables, connect from the AUDIO
OUT or LINE OUT AUDIO (red and white) jacks
on the back of the DVD-VCR to the AUDIO (red
and white) IN jacks of your TV.
Turn on the DVD-VCR and TV.
3
With the unit in Stop mode, set the Alt video
output to
Component: Interlace in the Display
Setup menu (see pages
55 ~ 56)
or press the
PROGRESSIVE button on the remote control
until Interlace is output.
Notes
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 ~ 19)
- Depending on the manufacturer. The number and position of jacks may vary depending on the TV set.
Please refer to the user's manual of your TV.
- The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you
must have the Video Out (Yellow) jack connected.
- You can hear sound from the
LINE OUT AUDIO or AUDIO OUT (red and white) jacks with a Component
connection. VCR audio only outputs through the Line Out Audio jacks (red and white).
White
Audio Cable
Component Cable
(not included)
Red
Red
White
Green
Blue
Blue
Red
Red
Green
4
Press the input selector on your TV remote
control until the Component signal from the DVD-
VCR appears on the TV screen.
01304B_V6700_XAA_Eng1_MJ 1/30/07 8:03 PM Page 15