Filter
Top Products
ENG-18
C
ONNECTIONS
Connection to an Audio System
Connecting to an Audio System (2 Channel Amplifier, Analog)
1
Using the audio cables, connect the (LINE)
AUDIO (red and white) OUT jacks on the back
of the DVD-VCR to the AUDIO (red and white)
IN
jacks of the Amplifier.
2
Using video signal cable(s), connect the VIDEO,
S-VIDEO or COMPONENT OUT jacks on the
back of the DVD-VCR to the VIDEO, S-VIDEO or
COMPONENT IN jack of your TV as described on
pages 13 to 16.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select the External input in order to hear sound
from the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 53 ~ 54)
- The position of the jacks may vary depending on the Amplifier.
Please refer to your Amplifier's user manual .
- You can also connect the amplifier using AUDIO OUT (red and white) jacks from the DVD-VCR.
Red
Audio Cable
White
Red
2-channel
Stereo Amp.
White
01304B_V6700_XAA_Eng1_MJ 1/30/07 8:03 PM Page 18