GB
27
GB
26
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1 Press SETUP on the remote control.
Result
: The MAIN MENU is displayed.
2 Press the corresponding
"
,
❷
buttons to select the VCR Setup
option.
3 Press the ENTER button to select this option.
4 Press the corresponding
"
,
❷
buttons to select the
Tape Select menu.
5 Press the
➛
or
❿
buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E300 E260
6 Press RETURN to exit the menu.
You can set repeat play to repeat the tape continuously from
beginning to end.
1 Press SETUP on the remote control.
Result
: The MAIN MENU is displayed.
2 Press the corresponding
"
,
❷
buttons to select the VCR Setup
option.
3 Press the ENTER button to select this option.
4 Press the corresponding
"
,
❷
buttons to select the
Repeat Play menu.
5 To... Press
➛
or
❿
, until...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6 On completion, press RETURN to exit the menu.
Auto Repeat Play
Auto Power Off
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1 Press SETUP on the remote control.
Result
: The MAIN MENU is displayed.
2 Press the corresponding
"
,
❷
buttons to select the Option.
3 Press the ENTER button to select this option.
Result
: The USER SET menu is displayed.
4 Press the corresponding
"
or
❷
buttons, until the AUTO POWER
OFF option is selected.
5 Press the
❿
button, until you select the time of Auto Power off
interval.
OFF 2HOUR 3HOUR
6 On completion, press RETURN to exit the menu.
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!!
➛!❿
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!!
➛!❿
VCR VCR
VCR
G-CODE EXTEND
To prevent delays or over-runs the DVD-VCR has a function called
G-CODE EXTEND allowing you to extend the recording time by up
to 60 minutes.
1 Press the SETUP button on the remote control.
2 Press the corresponding
"
,
❷
buttons to select the Option.
3 Press the ENTER button to select this option.
Result
: The USER SET menu is displayed.
4 Press the corresponding
"
or
❷
buttons, until the
G-CODE EXTEND option is selected.
5 Press
➛
or
❿
buttons to set the G-CODE EXTEND time by
increments of 10 minutes.
6 To turn off, press
➛
or
❿
buttons repeatedly until OFF shows.
VCR
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
➛!❿!!!
"❷
OFF
10
60
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
➛!❿!!!
"❷
OFF
10
60
Australia Model
Newzealand Model
Australia Model
Newzealand Model
00115A DVD-V77MS-GB2 10/25/02 10:46 AM Page 26
