Filter
Top Products
System Setup
English - 37
Quick Recording
It takes about 10 seconds for a disc to load (initialize) every time
you turn on the unit. To bypass this initialization process, you can
set the Quick Recording feature to On. This enables you to record
immediately without having to wait for the disc to load.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or ►
button.
3. Press the ▲▼ buttons to select System, then press the ENTER or ►
button.
4. Press the ▲▼ buttons to select Quick Recording, then press the
ENTER or ► button.
5. Press the ▲▼ buttons to select On, then press the ENTER or ► button.
The Quick Recording is set to Off as default.
If this function is set to on, power consumption Note will be
increased when the unit is powered off.
■
■
System
DVD-Recorder
No Disc
Timer Rec.
Setup
MOVE
ENTER RETURN EXIT
VCR
►
Video Input : AV 1
►
DVD EP Mode Time : 6 Hours
►
Chapter Creator : Off
►
Quick Recording : Off
►
Off
On
01344A-VR350-XAC-ENG.indb 3701344A-VR350-XAC-ENG.indb 37 2007-03-13 오후 5:08:262007-03-13 오후 5:08:26