Filter
Top Products
Recording
English - 56
Recording the Current Channel you are
watching
Before you start
1. Check to make sure the antenna cable is connected.
2. Check the remaining time on the disc.
DVD-RAM/DVD-RW discs should be formatted or initialized in
advance before beginning recording. (See page 54.)
3. Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
1. Press the OPEN/CLOSE button and place a recordable disc on the
disc tray.
2. Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
3. Press the CH/TRK (
/ ) buttons or number buttons to select the
channel you want to record.
4. Press the REC SPEED button repeatedly, to select the recording speed
(quality).
•
XP(High, approx. 1 hour) → SP(Standard, approx. 2 hours) →
LP(Low, approx. 4 hours) → EP(Extended Play, approx. 6 hours/8hours)
5. Press the REC button.
• “
” is displayed on the screen and recording begins.
6. Press the STOP button to stop or fi nish a recording in progress.
• The message “Updating the information of disc.
Please wait for a moment” is displayed.
Pausing / Resuming
• Press the REC PAUSE button to pause a recording in progress.
• Press the REC PAUSE button again during pause to resume recording.
• You can switch channels by pressing the CH/TRK (
/ ) buttons while
recording pauses.
Recording will stop automatically if there is no free space left for
recording.
Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc.
If the power is interrupted due to power failure or other reasons,
the title being recorded will not be saved onto the disc.
Recording will stop automatically if a copy protected image is
selected.
Do not use DVD-R authoring discs with this unit.
■
■
■
■
■
01344A-VR350-XAC-ENG.indb 5601344A-VR350-XAC-ENG.indb 56 2007-03-13 오후 5:09:052007-03-13 오후 5:09:05