Filter
Top Products
English-23
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected
to the TV (i.e., an air or cable system).
Memorizing Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels.
After the available channels are memorized, use the CH and CH buttons to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (channel manager).
Selecting the Video Signal Source
1
Press the MENU button. Press the or button to select “Channel”,
then press the ENTER button.
2
Press the or button to select “Antenna”, then press the ENTER button.
Press the or button to select “Air” or “Cable”, then press the
ENTER
button.
3
Press the or button to select “Auto Program”, then press the ENTER
button.
continued...
Channel
Enter
Channel
Antenna
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA
On
Return
Channel
Enter
Channel
Antenna
Auto Program
√
Channel Manager
Fine Tune
Signal Strength
LNA
Air
On
Return
Air
Cable
BP68-00620A-00Eng 9/14/06 5:27 PM Page 23