Filter
Top Products
English-46
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
1
Press the MENU button. Press the or button to select “Picture”,
then press the ENTER button.
Press the or button to select “Size”, then press the ENTER button.
2
Press the or buttons to select the screen format you want, then
press the ENTER button.
Select “Return” by pressing the or button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit.
You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV Component (720p, 1080i) or HDMI (720p, 1080i) mode.
For Zoom1, Zoom2, and Wide Fit (DTV’s HD signal only), you can adjust the vertical position using the
or
button after pressing the
P.SIZE button on the remote control.
When watching a DTV’s HD signal, you can use Wide Fit. Horizontal
zoom (Wide Fit) sets the optical picture format by expanding it both
horizontally and vertically. For example, you can reset the picture in
4:3 format to 16:9. Wide Fit does not support all external devices.
To maintain scale in the Wide Fit mode, portions of the picture on the
top and bottom will be cropped.
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on screen.
• Zoom2 : Magnifies the size of the picture more than “Zoom1”.
• Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
Alternate method
Press the P.SIZE button on the remote control
repeatedly to select one of the picture size settings.
Wide Fit
4 : 3
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode
4:3
On
Off
Off
Return
16:9
Zoom1
Zoom2
Wide Fit
4:3
Zoom1 Move
▲
▼
Picture
Enter
Picture
Mode
Size
Digital NR
DNIe
My Color Control
Film Mode
16:9
On
On
Off
Return
BP68-00620A-00Eng 9/14/06 5:27 PM Page 46