Filter
Top Products
English-24
4
Press the or button to select the Antenna connection,
then press the
ENTER
button.
When selecting Cable TV system:
Press the
ENTER
button to start the auto program.
By default, the cable TV system is set to “STD”.
If you want to select another type of cable system,
press the
or
button to select “STD”, “HRC” or “IRC”.
5
Press the
ENTER
button to start the auto program.
The TV begins memorizing all available stations.
Press the
ENTER
button at any time to interrupt the
memorization process.
Select “Return” by pressing the or button, then
press the
ENTER
button to return to the previous menu.
Press the EXIT button to exit.
• Air : “Air” antenna signal
Cable : “Cable” antenna signal
Air+Cable : “Air” and “Cable” antenna signals
• If you have Digital cable, select the signal source for both Analog
and Digital.
• STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
• The TV must be connected to air/cable in order to receive digital
TV signals. Even if a particular channel is deleted from the memory,
you can always tune to that channel directly by using the number buttons
on the remote control.
• When connecting Digital Cable to a Set-Top Box, Channel Memorization is
done on the STB.
To view the STB on your TV, select the Input jack the STB is connected to
with the
SOURCE button on the remote control. (see page 35)
All available DTV and analog channels are automatically stored in memory.
BP68-00620A-00Eng 9/14/06 5:27 PM Page 24