Filter
Top Products
Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the
TV source (air or cable).
Viewing an External Signal Source
1
Press the MENU button.
Press the ENTER button to select “Input”.
2
Press the or button to select “Source List”, then press the
ENTER button.
Press the or button to select a signal source, then press the
ENTER button.
•
When you connect equipment to the TV, you can choose between the
following sets of jacks: “AV1”, “AV2”, “S-Video1”, “S-Video2”, “Component1”,
“Component2”, “HDMI1”, or “HDMI2” on the TV’s rear panel, and "AV3", or
“S-Video3” on the TV's side panel.
Alternate method
Setting the Signal Source
Press the SOURCE button on the remote control
repeatedly to select an external signal source.
Only connected devices can be selected.
Before selecting an input source, make sure the corresponding external device is connected first.
HDMI input can be selected only when the external device is turned on and connected to the TV.
English-35
Input
Enter
Input
Source List
Edit Name
TV
Return
Input
Enter
Source List
TV
√
AV1
AV2
AV3
S-Video1
S-Video2
S-Video3
Component1
†
Component2
----
----
----
----
----
----
----
----
Return
AV1
BP68-00620A-00Eng 9/14/06 5:27 PM Page 35