Filter
Top Products
|
36 English
Media Play
00:09 00:43
TRACK 001
TRACK 001 00:43
TRACK 002 03:56
TRACK 003 04:41
TRACK 004 04:02
TRACK 005 03:43
TRACK 006 03:40
TRACK 007 04:06
TRACK 008 03:52
TRACK 009 03:04
TRACK 010 04:02
Options
offoff
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio CD
(CD-DA/MP3) at random.
1. During playback, use the ▲▼◄► buttons to select
in the lower left corner of the screen, and then
press the
E
button.
2. Use the ▲▼ to set the Shuffle mode Off or On, and
then press the
E
button.
Creating a Playlist from a CD
1. With the Playback screen displayed, select the
Options button and then press the
E
button. The
Options menu appears.
2. Use the
buttons to select Play Selected , and
then press the
E
button. The Play Selected screen
appears.
3. Use the
buttons to select a track, and then
press the
E
button. A check appears to the left of
the track.
4. Repeat Step 3 to select and check additional tracks.
5. To remove a track from the list, move to the track,
and then press the
E
button again.The check on
the track is removed.
6. When done, press the
buttons to select Play,
and then press the
E
button. The Music Playback
screen reappears listing only the tracks you
checked. The selected tracks play automatically.
| NOTES |
\
You can create a playlist with up to 99 tracks from
Audio CDs (CD-DA).
\
If you have created a playlist, Play Selected is
replaced by Edit Playlist on the Options menu.
\
On the Play Selected screen, you can also choose
Select All, Deselect All, and Cancel.
~
Use Select All to select all tracks. This cancels
your individual track selections. When you press
the RETURN button on your remote or select Play
and then press the
E
button, all tracks will appear
on the Music Playback screen, and the product will
begin to play all tracks from Track 001.
~
Use Deselect All to deselect all selected tracks at
once. Then, select individual tracks or use Select
All to select all the tracks, and then press the
RETURN
button on your remote or select Play and
then press the
E
button. If you do not use Select
All or select individual tracks, the Playlist will not
change.
~
Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback
screen, the Playlist will be unchanged.
Ripping
1. Insert a USB device into the USB jack on the front
of the product.
2. With the Playback screen displayed, select the
Options button and then press the
E
button.
The Options menu appears.
3. Use the ▲▼ buttons to select Ripping, and then
press the
E
button. The Ripping screen appears.
4. Use the ▲▼ buttons to select a track, and then
press the
E
button. A check appears to the left of
the track.
5. Repeat Step 4 to select and check additional tracks.
6. To remove a track from the list, move to the track,
and then press the
E
button again. The check on
the track is removed.
7. When done, select the Rip button using the ▲▼
buttons, and then press the
E
button.
The Rip pop-up appears.
8. Use the ▲▼ buttons to select the device to store
the ripped files on, and then press the
E
button.
| NOTES |
\
Do not disconnect the device while ripping is in
progress.
9. If you want to cancel ripping, press the
E
button
and then select Yes. Select No to continue ripping.
10. When ripping is complete, the “Successfully
Ripped.” message appears. Press the
E
button.
11. Press the RETURN button to go back to the
Playback screen.
| NOTES |
\
This function is not available with DTS Audio CDs.
\
This function may not be supported by some discs.
\
Ripping encodes music to the .mp3 format at
192kbps.
\
On the Ripping screen, you can also choose Select
All or Deselect All.
- Use Select All to select all tracks and press the
E
button. This cancels your individual track selections.
- Use Deselect All to deselect all selected tracks at
once.