Filter
Top Products
English - 108
Cable Network Setup
First, the “Network selection” must be set to “Cable”. (See page 107)
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically congured.
Please check if the LAN cable is connected. (See page 105)
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Cable Network Setup”, then press the
ENTER button.
3. Press the ENTER button to select “Internet Protocol Setup”.
4. Press the ▲ or ▼ button to select “Auto Setup”, then press the ENTER
button.
The Internet Protocol is set automatically.
Select “Network Test” to check the network connectivity.
(Refer to page 109)
Press the EXIT button to exit.
Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the
Internet Protocol (IP).
Please check if the LAN cable is connected. (See page 106)
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Cable Network Setup”, then press the
ENTER button.
3. Press the ENTER button to select “Internet Protocol Setup”.
4. Press the ▲ or ▼ button to select “Manual Setup”, then press the ENTER
button.
5.
Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric
button to congure the selected item. Press the ENTER button.
Select “Network Test” to check the network connectivity.
(Refer to page 109)
Press the EXIT button to exit.
➣
➣
➣
➣
➣
➣
Setup
Time
Network selection : Cable
CableNetworkSetup ►
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
Setup
Time
Network selection : Cable
CableNetworkSetup ►
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
Cable Network Setup
Internet Protocol Setup : Auto Setup
Network Test
IP Address :
0
0
0
0
Subnet Mask :
0
0
0
0
Gateway :
0
0
0
0
DNS Server :
0
0
0
0
EnterMove
Return
Auto Setup
Manual Setup
Cable Network Setup
Internet Protocol Setup : Auto Setup
Network Test
IP Address :
0
0
0
0
Subnet Mask :
0
0
0
0
Gateway :
0
0
0
0
DNS Server :
0
0
0
0
EnterMove
Return
Auto Setup
Manual Setup
Cable Network Setup
Internet Protocol Setup : Manual Setup
Network Test
IP Address :
0
0
0
0
Subnet Mask :
0
0
0
0
Gateway :
0
0
0
0
DNS Server :
0
0
0
0
Enter
Return
Move
Number
0 ~ 9
BN68-01470A-02Eng.indb 108 2008-05-29 ¿ÀÈÄ 4:59:09