English - 16
Changing Channels
Using the Channel Buttons
1.
Press the CH or CH button to change channels.
When you press the CH
or CH button, the TV changes channels in
sequence.
You will see all the channels that the TV has memorized. (The TV must
have memorized at least three channels). You will not see channels that
were either erased or not memorized. See page 18 to memorize channels.
To increase the channel number, turn the wheel clockwise when the
Channel Display is displayed. To decrease the channel number, turn the
wheel counterclockwise.
Using the Number Buttons
1.
Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
For quick channel change, press the number buttons, then press the
ENTER
button.
Using the Button
The button is used to select stations that broadcast a digital signal.
1. For example, for Channel 7-1, press 7, then , then 1.
HD indicates the TV is receiving a Digital High Denition signal.
SD indicates the TV is receiving a Standard Denition signal.
For quick channel change, press the number buttons, then press the
ENTER
button.
Using the PRE-CH Button to select the Previous Channel
1.
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel.
Then use the PRE-CH button to quickly alternate between them.
➣
➣
➣
➣
➣
➣
Adjusting the Volume
Using the Volume Button
1.
Press the VOL – or VOL+ button to increase or decrease the volume.
To turn the volume up, turn the wheel clockwise when the Volume
Control window is displayed. To turn the volume down, turn the wheel
counterclockwise.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.
Press MUTE button and the sound cuts off.
“ ” is displayed on the screen.
2.
To turn mute off, press the MUTE button again or simply press the
VOL – or VOL+ button.
➣
BN68-01470A-02Eng.indb 16 2008-05-29 ¿ÀÈÄ 4:56:54