Filter
Top Products
English - 19
Storing Channels in Memory (Automatic Method)
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER button.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Auto: “Air” and “Cable” antenna signals.
4. When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ▲,▼, ◄ or ► to select the correct analog signal cable system
source among “STD”, “HRC”, and “IRC”.
Press the ▲ or ▼ button to select “Start”, then press the ENTER button.
If you have Digital cable TV, select the cable system signal source for both
Analog and Digital.
STD, HRC and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
5.
The TV begins memorizing all available stations.
After all the available channels are stored, it starts to remove scrambled
channels (see page 43). The Auto program menu then reappears.
If you want to stop Auto Programming, press the ENTER
button.
The “Stop Auto Program?” message will be displayed. Select “Yes” by
pressing the ◄ or ► button, then press the ENTER button.
Press the EXIT button to exit.
➣
➣
➣
➣
Channel
Antenna
:
Air
Auto Program ►
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Auto Program
Auto Program is completed.
90 channels are memorized.
Air : 10 Cable : 80
OK
ReturnEnter
Auto Program
Auto Program in Progress.
Stop
Cable 38
50%
Enter
Return
DTV Cable : 12 Cable : 32
Auto Program
Stop Auto Program?
77%
ReturnEnter
No
Yes
Move
DTV Cable : 16 Cable : 45
Auto Program
Removing scrambled channel.
Stop
Enter
DTV Cable 41
77%
Return
DTV Cable : 16 Cable : 45
ReturnEnter
Move
Start
Auto Program
Selects the cable system.
Analog
Digital
HRC IRC
HRC IRCSTD
STD
ReturnEnter
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Move
Start
Start
Start
BN68-01470A-02Eng.indb 19 2008-05-29 ¿ÀÈÄ 4:56:57