Filter
Top Products
101
Specifications
11
11 Specifications
11.3 Standard Signal Mode Table
z This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
NC191
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
VESA, 640 x 480 31.469 59.940 25.175 -/-
MAC, 640 x 480 35.000 66.667 30.240 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA,640 x 480 37.500 75.000 31.500 -/-
VESA,800 x 600 35.156 56.250 36.000 +/+
VESA,800 x 600 37.879 60.317 40.000 +/+
VESA,800 x 600
48.077 72.188 50.000 +/+
VESA,800 x 600
46.875 75.000 49.500 +/+
MAC,832 x 624
49.726 74.551 57.284 -/-
VESA,1024 x 768
48.363 60.004 65.000 -/-
VESA,1024 x 768
56.476 70.069 75.000 -/-
VESA,1024 x 768
60.023 75.029 78.750 +/+
VESA,1152 x 864
67.500 75.000 108.000 +/+
MAC,1152 x 870
68.681 75.062 100.000 -/-
VESA,1280 x 720 45.000 60.000 74.250 +/+