Filter
Top Products
50
Using "PCoIP"
2
2 Using "PCoIP"
Ping Tab
The Ping page allows you to ping a device to see if it is reachable across the IP network. This may help
you determine if a host is reachable. As a result of firmware releases 3.2.0 and later forcing the “do not
fragment” flag in the ping command, you can use this feature to determine the maximum MTU size.
Figure 2-16: Ping
z Ping Settings
Destination
IP Address or FQDN to ping
Interval
Interval between ping packets
Packet Size
Size of the ping packet
z Packets
Sent
Number of ping packets transmitted
Received
Number of ping packets received
2.4.6 Information Window
The Information page lets you see details about the device. The Administrative Web Interface shows
version, VPD, and attached device information. The OSD lets you view the device version information.
The Version page lets you view the hardware and firmware version details for a device.