Filter
Top Products
20
NOTE
A -B Repeat & 3D Sound
The A-B Repeat function lets you mark a segment to repeat between the beginning (A) and
the end (B) of the segment you want to review.
1
Press the A-B REPEAT but-
ton at the beginning (A) of
the segment you want to
review.
2
Press the A-B REPEAT but-
ton again at the end (B) of
the segment you want to
review. The segment will
begin repeating.
3
To clear A-B Repeat, press
the A-B REPEAT button
again.
• The A-B Repeat function works on the same title or track.
• If the title or track is completed before marking the end (B), the end of the title or track
becomes B automatically.
• Depending on the disc, the A-B Repeat and 3D Sound functions may not work.
• 3D sound will not operate in VLM (Virtual Light Machine) mode.
Repeat A ->
Repeat A -> B
Repeat A -> B OFF
3D Sound
The simulated surround effect (SPATIALIZER N-2-2) depends on the disc contents. If you
connect the unit to your stereo system, you can enhance sound quality and produce a
greater surround effect. This feature is useful when you are using the DVD player with a
two channel stereo through the analog outputs.
(Discs which are recorded with DTS will not work. When the DIGITAL OUTPUT is set to
BITSTREAM in the SETUP MENU, the 3D Sound function will not work.)
1
Press the DISPLAY button. Use the UP/DOWN or LEFT/RIGHT to
select 3D Sound. Or press the 3D SOUND button on the remote.
(Be sure the DIGITAL OUTPUT is set to PCM.)
2
Use the UP/DOWN button to select the sound you want among
Speakers, Headphones or Off.(on DVD/VCD)
(When playing a CD, you can select On or Off.)
A-B Repeat