Filter
Top Products
English-19
You can select these options by simply
pressing the D.MENU button on the
remote control.
To help you navigate around the on-screen menu system and adjust the
various settings available, refer to the following illustration.
Available in the Digital TV mode.
Previewing the DTV Menu System
Updating the Channel List Automatically
You can update the channel list when the broadcaster adds new Services or if
you move the TV to a new location.
1. Press the D.MENU button to display the DTV menu.
2. Press the 5 or 6 button to select "Channel", then press the ENTER button.
3. Press the ENTER button again, to select "Auto Store".
4. When it has finished, the number of scanned services will be displayed.
The existing favourite channel list will not be deleted when the channel list is updated.
To stop the scan before it has finished, press the
ENTER
button with "STOP" selected.
5. Press the EXIT button to exit.
If the signal status is poor, the “No Service found! Check the aerial connection” message is displayed.
Press the D.MENU button.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Now/Next, Full Guide
Feature
Subtitle
Subtitle Language
Audio Language
On, Off
Channel
Auto Store
Manual Store
Edit Favourite Channels
Channel Manager
Preference
OSD Language
Translucency Level
Parental Lock
Parental Rating
Change PIN
High, Medium, Low, Opaque
English, Deutsch, Italiano, Français, Svenska
The sub-items of the CI Menu may vary depending on the CAM model.
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
Application Info
CI Menu
Module Information
Smart card information
Language
Software Download
BN68-01007C-00Eng.indd 19 2006-03-03 ¿ÀÈÄ 3:03:20